www.vita-style.co.uk | hello@vita-style.co.uk | +44 (0)1638 664988


Pioneer Grand Oak | Plank | 320x1200-3200mm

Product Specification

StylePlank
GradeCountry Grade XXXL Plank
Width mm320
Length mm1200-3200
Depth mm20
Wear Layer mm5
FinishUV Oiled
TextureBrushed
Fitting ProfileTongue and Groove
Surface Profile4 Side Bevel
Surface SpeciesElm
OriginEuropean
SustainabilityApproved Source Supplier

Country Grade XXXL Plank Grade

A Country XXXL Plank -grade flooring creates rustic charm with natural features like sound and filled knots, through knots, checks, and end splits. Rich plank colour variations enhance its appeal this diverse XXXL Plank size exaggerates the overall colour tones between planks this is due to the over sized nature of plank , up to 12.5% sapwood or mineral streak adds authentic country style.

Technical Specification

Production Tolerances5
Bowing Tolerances1.5% of Plank Length
OriginEuropean
Slip TestNA
Pentachlorophenol Emission<5ppm (CEN/TR 14823)
Formalddehyde EmissionE1 (EN 717-1)
Thermal ConductivityNPD
SustainabilityApproved Source Supplier
Janka HardnessOak 1,360 lbf

Installation

Fully BondedYes * (Recomended)
Secret Nailed/ScrewedYes *
Floated on UnderlayYes *
Floated on Built-in UnderlayN/A

Suitable for...


Bedroom

Commercial

Dining Room

Hallway

Kitchen

Living Room

Note

  • Delivery Bespoke product 'order-production-delivery' is between 1 to 3 weeks
  • Brand and Product Names do not indicate origin of product. Products can be partially produced in the UK and partially produced outside of the UK.
  • Smoked/Infused Colour variation is a natural tone reaction due to the sapwood and grain density within any plank. Colour variation is a prevalent aspect of smoked infused floors. This is a natural aspect of a smoked floor and is included within the grade and the flooring supplied.
  • In any natural wood flooring, you'll find natural color variations caused by differences in the sapwood and grain density. This means that individual planks can range from light to dark, which is a common and expected feature of the flooring and is included within its grade.
  • A bowing limit of 1.5% of the plank length is often considered acceptable. For instance, a plank of 1850mm length should ideally bow no more than 27.75mm (+/- 10%)
  • * Subject to a compatible subfloor, correct storage and installation
  • ** The subfloor surface temperatue must never be allowed to exceed 26°C
  • All information provided is 'typical/general'. For product specific information, please contact us.