www.vita-style.co.uk | hello@vita-style.co.uk | +44 (0)1638 664988


Naked Oak | Herringbone | 100x600mm

Product Specification

StyleHerringbone
GradeCharacter
Width mm100
Length mm600
Depth mm15
Wear Layer mm4
FinishUnfinished
TextureSmooth
Fitting ProfileTriple Groove One Tongue
Surface Profile4 Side Bevel
Surface SpeciesOak
OriginEuropean
SustainabilityApproved Source Supplier

Character Grade

Overall appearance of a character style floor, kYests allowed sound & filled, checks and small end splits allowed, colour variation plank to plank allowed, 7.5% sapwood/mineral streak on the face surface of each plank allowed

Technical Specification

Production Tolerances5
Bowing Tolerances1.5% of Plank Length
OriginEuropean
Slip TestNA
Pentachlorophenol Emission<5ppm (CEN/TR 14823)
Formalddehyde EmissionE1 (EN 717-1)
Thermal ConductivityNPD
SustainabilityApproved Source Supplier
Janka HardnessOak 1,360 lbf

Installation

Fully BondedNo
Secret Nailed/ScrewedNo
Floated on UnderlayNo
Floated on Built-in UnderlayN/A

Suitable for...


Bedroom

Commercial

Conservatory

Dining Room

Hallway

Kitchen

Living Room

Utility Room

Note

  • Delivery Bespoke product 'order-production-delivery' is between 1 to 3 weeks
  • Brand and Product Names do not indicate origin of product. Products can be partially produced in the UK and partially produced outside of the UK.
  • Smoked/Infused Colour variation is a natural tone reaction due to the sapwood and grain density within any plank. Colour variation is a prevalent aspect of smoked infused floors. This is a natural aspect of a smoked floor and is included within the grade and the flooring supplied.
  • In any natural wood flooring, you'll find natural color variations caused by differences in the sapwood and grain density. This means that individual planks can range from light to dark, which is a common and expected feature of the flooring and is included within its grade.
  • A bowing limit of 1.5% of the plank length is often considered acceptable. For instance, a plank of 1850mm length should ideally bow no more than 27.75mm (+/- 10%)
  • * Subject to a compatible subfloor, correct storage and installation
  • ** The subfloor surface temperatue must never be allowed to exceed 26°C
  • All information provided is 'typical/general'. For product specific information, please contact us.